Difference between revisions of "คู่มือการลง firmware EasyZone Cloud AP กับ Netgear R6220"
Easyhorpak (talk | contribs) |
Easyhorpak (talk | contribs) |
||
(5 intermediate revisions by the same user not shown) | |||
Line 7: | Line 7: | ||
'''ติดตั้งผ่านระบบ Telnet:''' | '''ติดตั้งผ่านระบบ Telnet:''' | ||
− | 1.โหลด firmware | + | 1.โหลด firmware |
โดยโหลดไฟล์ | โดยโหลดไฟล์ | ||
− | + | http://188.166.243.227/firmware/r6220/v2_9_4/openwrt-18.06.2-ramips-mt7621-r6220-squashfs-kernel.bin | |
− | + | http://188.166.243.227/firmware/r6220/v2_9_4/openwrt-18.06.2-ramips-mt7621-r6220-squashfs-rootfs.bin | |
คัดลอกไฟล์ openwrt-18.06.2-ramips-mt7621-r6220-squashfs-kernel.bin และ openwrt-18.06.2-ramips-mt7621-r6220-squashfs-rootfs.bin ลง USB flash disk และเสียบไปที่ พอท USB ของ router | คัดลอกไฟล์ openwrt-18.06.2-ramips-mt7621-r6220-squashfs-kernel.bin และ openwrt-18.06.2-ramips-mt7621-r6220-squashfs-rootfs.bin ลง USB flash disk และเสียบไปที่ พอท USB ของ router | ||
Line 29: | Line 29: | ||
7. พิมพ์คำสั่ง mtd_write write openwrt-18.06.2-ramips-mt7621-r6220-squashfs-rootfs.bin Rootfs | 7. พิมพ์คำสั่ง mtd_write write openwrt-18.06.2-ramips-mt7621-r6220-squashfs-rootfs.bin Rootfs | ||
− | 8. พิมพ์คำำสั่ง mtd_write write openwrt-18.06.2-ramips-mt7621-r6220-squashfs- | + | 8. พิมพ์คำำสั่ง mtd_write write openwrt-18.06.2-ramips-mt7621-r6220-squashfs-kernel.bin Kernel |
9. พิมพ์คำสั่ง reboot | 9. พิมพ์คำสั่ง reboot | ||
− | + | '''การแอด mac address เข้าระบบ cloud ap stock และ active mac ที่เพื่อจัดการอุปกรณ์''' | |
− | + | 1. เชื่อมสายเน็ตเข้า อุปกรณ์ ที่พอท LAN1-4 พอทใดก็ได้ | |
− | + | 2. เช็คว่าเครื่องได้ IP อะไร แล้วเช็ค mac address ของ เครื่อง | |
− | + | 3. เพิ่ม mac address ในระบบ cloud ap stock | |
− | |||
− | |||
+ | 4. นำแมคไป active ที่ hotspot ที่ต้องการในเมนู device/อุปกรณ์ | ||
+ | '''5. หาก cloud ap ของเราอยู่หลัง ระบบ authen เช่น mikrotik หรือ netgear hotspot authen ให้ทำการ bypass เว็บ auto.cloud-hotspot.com เพื่อให้ cloud ap เชื่อมกับ controller ได้''' | ||
ที่มา https://openwrt.org/toh/netgear/netgear_r6220 | ที่มา https://openwrt.org/toh/netgear/netgear_r6220 |
Latest revision as of 14:50, 22 May 2019
คำแนะนำควร reset default อุปกรณ์ เพื่อให้อุปกรณ์ได้ ip 192.168.1.1 ก่อนทำการลง firmware และ ไม่ต่อ internet เข้าอุปกรณ์
ติดตั้งผ่านระบบ Telnet:
1.โหลด firmware
โดยโหลดไฟล์
http://188.166.243.227/firmware/r6220/v2_9_4/openwrt-18.06.2-ramips-mt7621-r6220-squashfs-kernel.bin
http://188.166.243.227/firmware/r6220/v2_9_4/openwrt-18.06.2-ramips-mt7621-r6220-squashfs-rootfs.bin
คัดลอกไฟล์ openwrt-18.06.2-ramips-mt7621-r6220-squashfs-kernel.bin และ openwrt-18.06.2-ramips-mt7621-r6220-squashfs-rootfs.bin ลง USB flash disk และเสียบไปที่ พอท USB ของ router
2. เข้าเว็บ http://[IP-address]/setup.cgi?todo=debug (หากระบบให้กรอก username ให้กรอก รหัสโรงงาน: admin - password)
3. ในหน้าเว็บจะแสดงข้อความ “Debug Enabled!”
4. telnet ไปที่ IP-address ของ router และ login username “root” (รหัสโรงงาน: admin - password)
5. ใช้คำสั่ง ls /mnt/shares/ เพื่อแสดง path ของ USB
6. ใช้คำสั่ง cd /mnt/shares/U
7. พิมพ์คำสั่ง mtd_write write openwrt-18.06.2-ramips-mt7621-r6220-squashfs-rootfs.bin Rootfs
8. พิมพ์คำำสั่ง mtd_write write openwrt-18.06.2-ramips-mt7621-r6220-squashfs-kernel.bin Kernel
9. พิมพ์คำสั่ง reboot
การแอด mac address เข้าระบบ cloud ap stock และ active mac ที่เพื่อจัดการอุปกรณ์
1. เชื่อมสายเน็ตเข้า อุปกรณ์ ที่พอท LAN1-4 พอทใดก็ได้
2. เช็คว่าเครื่องได้ IP อะไร แล้วเช็ค mac address ของ เครื่อง
3. เพิ่ม mac address ในระบบ cloud ap stock
4. นำแมคไป active ที่ hotspot ที่ต้องการในเมนู device/อุปกรณ์
5. หาก cloud ap ของเราอยู่หลัง ระบบ authen เช่น mikrotik หรือ netgear hotspot authen ให้ทำการ bypass เว็บ auto.cloud-hotspot.com เพื่อให้ cloud ap เชื่อมกับ controller ได้