Difference between revisions of "คู่มือการลง firmware EasyZone Cloud AP กับ TP-Link Archer C50"
Easyhorpak (talk | contribs) (Created page with " Installing via TFTP ------------------- Prepare an image like following (Filenames from factory image steps apply here) > dd if=/dev/zero of=tp_recovery.bin bs=196608 count...") |
Easyhorpak (talk | contribs) |
||
(2 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
+ | ลง Firmware ผ่าน โปรแกรม TFTP | ||
+ | ------------------- | ||
+ | 1. Download Firmware ได้ที่ http://188.166.243.227/firmware/tp_recovery.bin | ||
+ | |||
+ | 2. ติดตั้งระบบ TFTP server และนำไฟล์วางใน /root และตั้งค่า ip เครื่องเป็น listen on 192.168.0.66/24. | ||
+ | |||
+ | 3. เชื่อม router เข้ากับเครื่องที่ทำ TFTP Server กดปุ่ม reset ค้างไว้และกดปุ่มเปิด router | ||
+ | |||
+ | อุปกรณ์ Router จะทำการดาวน์โหลด firmware และติดตั้ง | ||
+ | |||
+ | 4. รอประมาณ 1 นาที เพื่ออุปกรณ์ reboot ตัวเอง | ||
+ | |||
+ | ----------------------------------------------------------------------------- | ||
Installing via TFTP | Installing via TFTP | ||
------------------- | ------------------- | ||
− | + | Download firmware at http://188.166.243.227/firmware/tp_recovery.bin | |
− | |||
− | + | Place tp_recovery.bin in root directory of TFTP server and listen on 192.168.0.66/24. | |
− | |||
− | |||
− | |||
− | |||
− | + | Connect router LAN ports with your computer and power up the router | |
− | |||
− | |||
while pressing the reset button. The router will download the image via | while pressing the reset button. The router will download the image via | ||
+ | |||
tftp and after ~1 Minute reboot into OpenWRT. | tftp and after ~1 Minute reboot into OpenWRT. | ||
+ | |||
+ | refer : https://github.com/blocktrron/openwrt/commit/2410f411f3bc32d6110d1df34a876fff181706b9 |
Latest revision as of 21:46, 1 May 2019
ลง Firmware ผ่าน โปรแกรม TFTP
1. Download Firmware ได้ที่ http://188.166.243.227/firmware/tp_recovery.bin
2. ติดตั้งระบบ TFTP server และนำไฟล์วางใน /root และตั้งค่า ip เครื่องเป็น listen on 192.168.0.66/24.
3. เชื่อม router เข้ากับเครื่องที่ทำ TFTP Server กดปุ่ม reset ค้างไว้และกดปุ่มเปิด router
อุปกรณ์ Router จะทำการดาวน์โหลด firmware และติดตั้ง
4. รอประมาณ 1 นาที เพื่ออุปกรณ์ reboot ตัวเอง
Installing via TFTP
Download firmware at http://188.166.243.227/firmware/tp_recovery.bin
Place tp_recovery.bin in root directory of TFTP server and listen on 192.168.0.66/24.
Connect router LAN ports with your computer and power up the router
while pressing the reset button. The router will download the image via
tftp and after ~1 Minute reboot into OpenWRT.
refer : https://github.com/blocktrron/openwrt/commit/2410f411f3bc32d6110d1df34a876fff181706b9