คู่มือการลง firmware EasyZone Cloud AP กับ tp-link eap225-outdoor

Installation using the web interface

1. Upgrade the firmware to version v5.0.5, which fixes a bug that may cause the EAP to reboot abnormally during firmware upgrading and cause the device to brick

Download :

v1 https://auto.cloud-hotspot.com/firmware/tplink_eap225-outdoor-v1/v2_9_9/EAP225-OUTDOORv1_5.0.5_%5b20210604-rel51118%5d_up_signed.bin

v3 http://auto.cloud-hotspot.com/firmware/tplink_eap225-outdoor-v3/v2_9_93/openwrt-ath79-generic-tplink_eap225-outdoor-v3-squashfs-factory.bin

2. Enable the SSH-Server via the web interface

3. ssh into the target device and run `cliclientd stopcs`

4. upload the factory image via the web interface

Download :

v1 https://auto.cloud-hotspot.com/firmware/tplink_eap225-outdoor-v1/v2_9_9/easyzone_cloud_ap_tplink_eap225-outdoor-v1_v2_9_9-factory.bin

v3 http://auto.cloud-hotspot.com/firmware/tplink_eap225-outdoor-v3/v2_9_93/openwrt-ath79-generic-tplink_eap225-outdoor-v3-squashfs-factory.bin